Online Catalogue
Blaydon Communications Limited, Factory Road, Blaydon,
Tyne and Wear, NE21 5RY (Registered in England No 1051050)

Tel: 0191 4144241 ~ Fax: 0191 4147978

View Cart | Checkout | Items:, Value:
spacer
spacer

Best Sellers

Voltstick 110

Voltstick 110






This high sensitivity version of the Volt Stick provides instant, noncontact checking for the presence of AC voltage down to 110v, without making any disconnections in cables, wall sockets, fuses,circuit breakers, junction boxes etc.

This 110v version is ideal for construction site temporary supplies and, of course, for use in mains testing in the USA.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.


Features:
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs


Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick 110
90 ~ 400 AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 110v
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

find out more

£13.14

spacer

Test Equipment

Online Catalogue |  Test Equipment

Voltstick 230Y


Voltstick 230Y

Quantity:



Price: £10.95 (Excluding VAT at 20%)

The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

Features:
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick 230Y
220 ~ 230v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 220v
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Voltstick 230B


Voltstick 230B

Quantity:



Price: £10.95 (Excluding VAT at 20%)

The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

Features:
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick 230Y
220 ~ 230v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 220v
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Voltstick 110


Voltstick 110

Quantity:



Price: £10.95 (Excluding VAT at 20%)






This high sensitivity version of the Volt Stick provides instant, noncontact checking for the presence of AC voltage down to 110v, without making any disconnections in cables, wall sockets, fuses,circuit breakers, junction boxes etc.

This 110v version is ideal for construction site temporary supplies and, of course, for use in mains testing in the USA.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.


Features:
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs


Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick 110
90 ~ 400 AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 110v
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Voltstick Sound


Voltstick Sound

Quantity:



Price: £11.95 (Excluding VAT at 20%)






The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

The Volt Stick SOUND features a detection buzzer for even greater clarification. Also ideal for ‘detection round corners’, in bright daylight and in awkward out of sight areas. High visibility green tube for ease of identification if dropped or hidden in the toolbox.


Features:
• Added ‘Bleeper’ feature
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
SOUND
220 ~ 230v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 220v
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
40g (including batteries)

Voltstick LV50


Voltstick LV50

Quantity:



Price: £18.95 (Excluding VAT at 20%)






The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

This high sensitivity version (testing down to 50v) is also intrinsically safe, making it an essential ‘life-saver’ testing tool for utilities engineers as well as for use in hazardous areas such as chemical plants, oil refineries and off shore rigs.

Used as a safety device to make sure metallic surfaces, pipework and cables are safe from potentially lethal voltages.

EEx IB IICT4
Nemko 03ATEX 1456
Nemko 0470


Features:
• EEx approved voltage indicator for use in explosive environments
• Voltage indicator with safety handguard to avoid unintentional contact with live conductors
• Voltage range 50 ~ 1000v AC
• Fully insulated for safe use
• Intrinsically safe

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick LV50
50 ~ 1000v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 50v
Immediate
Yes
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Voltstick EX110


Voltstick EX110

Quantity:



Price: £18.95 (Excluding VAT at 20%)






The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

This intrinsically-safe EX110 is ATEX approved for use in hazardous areas such as chemical plants, oil refineries and off shore rigs.

Features:
• Voltage range 110 ~ 230v AC
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs
• Intrinsically safe


Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick EX110
110v ~ 230v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 110v
Immediate
Yes
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Voltstick EX230


Voltstick EX230

Quantity:



Price: £18.95 (Excluding VAT at 20%)






The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

This intrinsically-safe EX230 is ATEX approved for use in hazardous areas such as chemical plants, oil refineries and off shore rigs.
Features:
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs
• Intrinsically safe


Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick EX230
220v ~ 230v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 220v
Immediate
Yes
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Voltstick PRO12


Voltstick PRO12

Quantity:



Price: £19.95 (Excluding VAT at 20%)






The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

The PRO12 features a unique ‘shielded’ forktip for highly selective and accurate testing for presence of AC voltage in specific cables or wires. Ideal for professional, close proximity testing and installation work.

Features:
• Unique forked tip (patented for) gives unsurpassed selectivity and reduces the risk of spurious indications
• Live cables can easily be detected in equipment cabinets, fuse boxes, etc
• Cables and connections can easily be checked in low voltage equipment too
• Extremely safe when measuring in junction boxes
• With the supplied field strength amplifier, anti-tamper, earthed outlets can be checked.
• Powerful red light in the tip to indicate voltage
• Fully insulated for safe use

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick PRO12
12v ~ 600v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 220v AC
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
40g (including batteries)

Voltstick PRO230


Voltstick PRO230

Quantity:



Price: £19.95 (Excluding VAT at 20%)






The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

The PRO230 features a unique ‘shielded’ forktip for highly selective and accurate testing for presence of AC voltage in specific cables or wires. Ideal for professional, close proximity testing and installation work.


Features:
• Unique forked tip (patented for) gives unsurpassed selectivity and reduces the risk of spurious indications
• Live cables can easily be detected in equipment cabinets, fuse boxes, etc
• Cables and connections can easily be checked in low voltage equipment too
• Extremely safe when measuring in junction boxes
• With the supplied field strength amplifier, anti-tamper, earthed outlets can be checked.
• Powerful red light in the tip to indicate voltage
• Fully insulated for safe use

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Volt Stick PRO230
230v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 220v AC
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-10 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
40g (including batteries)

Voltstick Magnetstick


Voltstick Magnetstick

Quantity:



Price: £13.95 (Excluding VAT at 20%)






The Magnet Stick provides safe and simple checking for the presence of magnetism.

Upon testing and without metallic contact, the lamp lights immediately where there is a magnetic field (e.g. an activated coil in a solenoid valve). Equipment can be tested without having to switch it off and
magnetic coils can often be tested through their protective cover, saving hours of dismantling time.

The Magnet Stick responds to all kinds of magnetic fields from alternating or direct current, to permanent magnets.


Features:
• Powerful red light in the tip to indicate presence of a magnetic field
• Easy to use
• Solenoid valves in pneumatic and hydraulic control equipment can easily be tested
• Test relays with coils and electrically controlled solenoid valves in all types of vehicles and machines
• Test solenoid valves when servicing oil burnerss

Applications:
• Testing operating solenoid valves in pneumatic and hydraulic control equipment
• Testing relays with coils and electrically-controlled solenoid valves in all types of vehicles and machines
• Testing solenoid valves when servicing oil burners


Specifications:

Model:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Magnet Stick
300 Gauss (0.3mT)V
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Voltstick MagnetstickEX


Voltstick MagnetstickEX

Quantity:



Price: £21.95 (Excluding VAT at 20%)






The Magnet Stick provides safe and simple checking for the presence of magnetism.

Upon testing and without metallic contact, the lamp lights immediately where there is a magnetic field (e.g. an activated coil in a solenoid valve). Equipment can be tested without having to switch it off and magnetic coils can often be tested through their protective cover, saving hours of dismantling time.

The Magnet Stick responds to all kinds of magnetic fields from alternating or direct current, to permanent magnets.

This intrinsically-safe Magnet Stick EX is ATEX approved for use in hazardous areas such as chemical plants, oil refineries and offshore rigs.

Features:
• Powerful red light in the tip to indicate presence of a magnetic field
• Easy to use
• Solenoid valves in pneumatic and hydraulic control equipment can easily be tested
• Test relays with coils and electrically controlled solenoid valves in all types of vehicles and machines
• Test solenoid valves when servicing oil burners
• Intrinsically safe

Applications:
• Testing operating solenoid valves in pneumatic and hydraulic control equipment
• Testing relays with coils and electrically-controlled solenoid valves in all types of vehicles and machines
• Testing solenoid valves when servicing oil burners

Specifications:

Model:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:
Magnet Stick
300 Gauss (0.3mT)V
Immediate
Yes
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Current Thinking ETRX Loop Receiver


Current Thinking ETRX Loop Receiver

Quantity:



Price: £55.00 (Excluding VAT at 20%)

The ETRX is a loop listening device allowing non hearing aid users to listen to the broadcast of the induction loop system. Ideal for testing of induction loop systems.

Supplied with heaphones.

Current Thinking ETFSM Field Strength Meter


Current Thinking ETFSM Field Strength Meter

Quantity:



Price: £118.37 (Excluding VAT at 20%)

The ETFSM is designed to allow the accurate measurement of loop field strength within an area covered by an induction loop (AFILS) system.

This is an essential piece of test equipment for all those involved in installation and commissioning of induction loop systems.

TOA ZM-104 Impedance Meter


TOA ZM-104 Impedance Meter

Quantity:



Price: £226.38 (Excluding VAT at 20%)

TOA ZM-104 Impedance Meter

An absolute must for your toolbox, with the TOA ZM-104 fault finding loudspeaker faults will become easier than ever. The unit generates a strong 1kHz tone to allow you to hear which loudspeakers are working on a circuit and which ones are not. It will also provide accurate impedance measurements via an easy to read analogue display, these readings can the be used to work out wattage on 100v systems or determine loudspeaker loadings on multiple low impedance installations.

Range x 1: 5 Ohm ~ 1k Ohm.
Range x 10: 50 Ohm ~ 10k Ohm.
Range x 100: 500 Ohm ~ 100k Ohm.

Link to manufacturer information

Online Catalogue |  Test Equipment

Blaydon Communications Limited - Registered in England No 1051050

spacer
spacer