Paging Microphones

Preamplified paging console


The built-in amplifier raises a very low level microphone signal to the nominal value of 0 dB (775 mV). An auxiliary input enables up to thirty BM 3002 stands to be connected in series on a single high level input of the amplifier. Four different function modes are possible when multiple microphone stands are connected in series: o mixed; o interlocking; o mixed with two stands having graduated priority; o interlocking with two stands having graduated priority. The excellent directivity of the condenser microphone reduces feedback, off-axis noise, and background noise.
The stand includes a generator for a two-tone signal (chime) to precede microphone announcements.

- Pushbuttons for both momentary and latching microphone activation.
- 320 mm gooseneck entirely chromium-plated in black to resist scratching and eliminate undesired reflections.
- Shock-resistant plastic body.
- Microphone windscreen in polyurethane foam.
- Emergency power supply by means of 24 V battery.

Link to manufacturer information

Paging console

The BM3013 can be attached to a support surface. The two supplementary conductors of the audio cable can be used for controlling auxiliary devices (e.g. “voice priority” function control on the RCF AM 1000 series amplifiers). Microphone featuring high sensitivity and extended frequency response.

- Warning signal generator for announcements with 2/3 tones, with frequency/decline adjustable between two sets of values.
- Adjustable warning signal volume level.
- Body in plastic.
- Black chromium-plated 320 mm gooseneck.
- Five-metre audio connection cable XLR connector.
- Audio cable with two auxiliary conductors connected to a normally open auxiliary contact on the stand.

Link to manufacturer information

Paging console

Unidirectional cardoid-pattern microphone with high sensitivity and extended frequency response. Factory-fitted for direct connection to the AM4000 series, PR4092, EL2126 CD sintoamplifier and 1000 series amplifiers.

- Pushbutton for momentary microphone activation.
- 320 mm gooseneck entirely chromium-plated in black to resist scratching and eliminate undesired reflections.
- Plastic body extremely resistant to shock and handling.
- 5-metre connection cable with XLR connector; two auxiliary conductors coming from the connector for controlling the priority function (1000 - 4000 series amplifiers) and acoustic preannouncement signal (4000 series amplifiers equipped with A1708)

Link to manufacturer information

Expressly designed to be used with the PD 1066 switching unit. Equipped with six buttons used for selecting the audio zones in which a microphone announcement is to be made, interrupting the background music where present (system with 2 amplifiers). When the stand is connected to a high level input of the amplifier, the maximum distance can reach 1000 metres without any problems of disturbance or interference (with balanced line). By activating the “Alarm” function, it is possible to drive the amplifier with a two-tone siren signal incorporated in the stand. The audio cable has an auxiliary conductor for controlling the chime
board of the amp, where present (e.g. A 1708 board for RCF 4000 series amps). The stand can be permanently attached to the support surface.The dynamic microphone features high sensitivity. The output level can be selected between two values for connecting the stand to either a microphone input of the amplifier (low level) or a line input (high level). Two-tone siren activated by means of the “Alarm” button, with adjustable volume and oscillation frequency. An auxiliary input makes it possible to connect up to ten BM 3067 stands in series which will drive only one line input of the amplifier (high level). Four possible operating modes: mixed, interlocking, mixed with two stands having graduated priority, interlocking with two stands having graduated priority. The stand has a button for activating the “General Call” function on the PD 1066 unit; a button for activating the Alarm” function on the PD 1066; 6 buttons for activating the Zone relays of the PD 1066 unit; and a button for atching activation of the microphone. Body in plastic. Black chromium-plated 320mm gooseneck.
Five-metre audio cable with 3-pin XLR connector for connection with the amplifier. Five-metre cable for connection with the PD 1066 unit.


Related products:

The system can be composed of a maximum of six BM 8001 control consoles, from which each operator can send announcements to specific audio zones. The announcements can be made directly from the console microphone, or messages can be sent which have been pre-recorded on other equipment (e.g. the RD 2008 digital recorder). The maximum duration of the message is 12 seconds.
The BM 8001 console also includes an alarm button which sends pre-recorded message number 1 with absolute priority over messages from any other console, and enables a subsequent microphone announcement in all zones of the system. If there is more than one BM 8001 console in the system, the activation of each can be regulated by means of a 6-level graduated priority system which permits certain consoles to intervene immediately when the system is engaged.
Numerous other functions facilitate and speed up console operations, including automatic activation/disactivation of all zones simultaneously, storage of 4 configurations with which four groups of pre-defined zones can be recalled and activated, and automatic disactivation of the active console when it has not been used for a certain period of time.

Link to manufacturer information

Related products:

Microphone, Paging, Desktop

Desktop type dynamic microphone with cardioid polar pattern.
Short-off press to talk switch with open OFF type extra switch contact.
Low handling noise.
PM660D/U has a 600 Ohm balanced output impedance with either 5 pin din or open end confirguration.
PM660 has a 600 Ohm unbalanced output impedance with 6.3mm (1/4") unbalanced jack.
2.5m connection cable.
PM660D/U can be remotely operated with additional components such as priority and transmitting / receiving relays and comes with a switch pair wired in the flex.

Link to manufacturer information

Related products:

RM-200M Remote Microphone

RM-200M Remote Microphone

Link to manufacturer information

Related products:

RM-200XF Fireman`s Microphone

A dedicated microphone for the VX-2000 system that fulfills the requirements of British and European standards:BS5839 part 8, EN60849 and IEC60849. The RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general purpose broadcast applications as well.


Link to manufacturer information

VR-1001B Paging Microphone

Designed for V-1000 Series microphone pre-amps and chime modules.
Press to talk switch.
Chime and speech lamps provided.
Two 5-pin DIN plugs for connection to microphone amps and chime modules.

Link to manufacturer information

VR-1005 Remote Microphone

Unidirectional Microphone.
Announcement to each or to all of 5 zones.
Built in compressor circuit and level indicator prevent input distortion.
Preselected or "first on" priorities can be established among multiple microphone units.
AUX input jack and 3 convenient connectors.
Built in multiple sound chime with selectable automatic or manual operation.

Link to manufacturer information

VR-1010 Remote Microphone

Unidirectional Microphone.
Announcement to each or to all of 10 zones.
Built in compressor circuit and level indicator prevent input distortion.
Preselected or "first on" priorities can be established among multiple microphone units.
AUX input jack and 3 convenient connectors.
Built in multiple sound chime with selectable automatic or manual operation.
VR-1010 requires V-1069B Data Receiver Module, for a maximum of four remote microphones per V-1069B.
Connection of VR-1010 to VR-1069B is via one twin shielded signal cable and two twisted data and DC power cables.

Link to manufacturer information

VR-1020 Remote Microphone

Unidirectional Microphone.
Announcement to each or to all of 20 zones.
Built in compressor circuit and level indicator prevent input distortion.
Preselected or "first on" priorities can be established among multiple microphone units.
AUX input jack and 3 convenient connectors.
Built in multiple sound chime with selectable automatic or manual operation.
VR-1020 requires V-1069B Data Receiver Module, for a maximum of four remote microphones per V-1069B.
Connection of VR-1020 to VR-1069B is via one twin shielded signal cable and two twisted data and DC power cables.

Link to manufacturer information