Ceiling Loudspeakers

Ideal for applications requiring premium sound quality
Special diffuser provides wide off-axis high frequency response
UL-Listed for Fire Protective, General Purpose Signaling and Air-Handling Spaces (UL1480 UUMW/UEAY, UL2043)
Ported bass-reflex design
5” full-range driver
Wide-dispersion: 180º (1-4k Hz avg.)
Frequency Response: 70 to 20k Hz
Sensitivity: 90 dB SPL (1 W, 1 m)
Continuous Power Handling: 120 W
Built-in 100V transformer (30 W max.) with 8/16 ohm direct modes
Convenient power tap selector on front baffle
Integral metal back-can and safety cable
Removable terminal block with loop-through terminations
Low-profile, paintable grille
Overload protection circuitry
Mounting C-ring included

Link to manufacturer information

Ultra-compact – only 4.2”(106 mm) deep!
4” full-range driver
Wide-dispersion: 160º conical (1-4k Hz avg.)
Frequency Response: 65 to 18k Hz
Sensitivity: 88 dB SPL (1 W, 1 m)
Continuous Power Handling: 18 W
Built-in 25/70.7/100 V transformer (6 W max.) with 8/16 ohm direct modes
Convenient power tap selector on front baffle
Four pole push-terminal input connector
Low-profile, paintable grille
Dust cover to protect components

Link to manufacturer information

Ported bass-reflex design
5” full-range driver
Frequency Response: 70 to 20k Hz
Wide-dispersion: 170º conical (1-4k Hz avg.)
Sensitivity: 90 dB SPL (1 W, 1 m)
Continuous Power Handling: 120 W (8 ohms)
Built-in 25/70.7/100 V transformer (30 W max.) with 8/16 ohm direct modes
Convenient power tap selector on front baffle
Metal back-can and safety cable
UL Compliant for Air-Handling Spaces (UL2043)
Removable terminal block with loop-through terminations
Low-profile, paintable grille
Overload protection circuitry
Mounting C-ring included

Link to manufacturer information

Special diffuser provides wide off-axis high frequency response
Ported bass-reflex design
Co-axial: 5” cone driver and dome tweeter
Wide-dispersion: 170º conical (1-4k Hz avg.)
Frequency Response: 70 to 20k Hz
Sensitivity: 90 dB SPL (1 W, 1 m)
Continuous Power Handling: 120 W (8 ohms)
Built-in 25/70.7/100 V transformer (30 W max.) with 8/16 ohm direct modes
Convenient power tap selector on front baffle
Metal back-can and safety cable
Removable terminal block with loop-through terminations
Low-profile, paintable grille
Overload protection circuitry
Mounting C-ring included

Link to manufacturer information

Special diffuser provides wide off-axis high frequency response
Co-axial: 5” cone driver and dome tweeter
Wide-dispersion: 155º conical (1-4k Hz avg.)
Frequency Response: 80 to 20k Hz
Sensitivity: 89 dB SPL (1 W, 1 m)
Continuous Power Handling: 18 W (8 ohms)
Built-in 25/70.7/100 V transformer (6 W max.) with 8/16 ohm direct modes
Convenient power tap selector on front baffle
Four pole push-terminal input connector
Low-profile, paintable grille
Dust cover to protect components

Link to manufacturer information

Ideal for high ceiling applications
Special diffuser provides wide off-axis high frequency response
Ported bass-reflex design
Co-axial: 6.5” cone driver and dome tweeter
Wide-dispersion: 120º conical (1-4k Hz avg.)
Frequency Response: 60 to 20k Hz
Sensitivity: 91 dB SPL (1 W, 1 m)
Continuous Power Handling: 180 W (8 ohms)
Built-in 25/70.7/100 V transformer (30 W max.) with 8/16 ohm modes
Convenient power tap selector on front baffle
Metal back-can and safety cable
Removable terminal block with loop-through terminations
Low-profile, paintable grille
Overload protection circuitry
Mounting C-ring included

MQ50C

Compact design, light weight and limited depth make the RCF MQ50C 2-way
ceiling monitor loudspeakers ideal for use in any PA systems and background/
foreground music systems where high quality sound reproduction is required.
The woofer is a high-excursion, PP coated paper cone – rubber surround design
mounted in a tuned enclosure. The fabric dome tweeter is loaded on a constant Q
wave guide to provide natural, smooth sound reproduction on a wide dispersion
angle. Installation of the MQ50C is fast and effi cient using the built in rotating
hooks. No additional brackets or rings or other supports are required: thanks to
its lightweight construction the speaker can be mounted as a conventional ceiling
speaker. Connections are made to four polar loop thru Euroblock male and female
connectors to easily offer parallel in/out wiring facilities. Wattage taps and voltage
adjustments together with 16-ohm operation are selectable by means
of a Rotary switch, accessible under the frontal grill. A front protection system is
provided for over-painting the bezel and grille.

Link to manufacturer information

Related products:

PC-3CL (3W) For Clean Rooms and Steam / Sauna Room

Compact, high power handling.
Completely sealed flush mounted clean room or operating room speaker.
Plastic film diaphragm rated at 3W at 3.3k O and 1W at 10k O.
Stainless steel punching net.
ABS resin enclosure / Alloy coated ABS resin panel.

Link to manufacturer information

PC-3WR (3W) Splashproof for Shower Rooms and Indoor Pool

Compact, high power handling.
Completely sealed flush mounted high humidity area speaker.
Plastic film diaphragm rated at 3W at 3.3k O and 1W at 10k O.
Stainless steel punching net.
ABS resin enclosure / Alloy coated ABS resin panel.

Link to manufacturer information

PC-2668 (6w)

Surface Mount-Ceiling Speakers
Description: Ceiling Speakers for easy installation with spring catches. With vault baffle ABS resin, off-white, RAL 9010. Push-in connectors with In/Out bridges. For 100V and 70V lines.


Link to manufacturer information

Ceiling speakers featuring elegant and innovative design that can be flush-mounted in false ceilings or panels. Incorporate an 86 mm-3.5” a full range speaker.

The speakers are equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V. The multiple sockets on the transformer make it possible to select the output power from among several values.

Installation is quick and easy thanks to a special three-hook system that avoids the need for using screws and pallet or other attachment elements.
- Plastic body and white metal grid RAL 9003.
- Protection IP 44.

Link to manufacturer information

The PL60 is a ceiling speaker with an elegant design, intended for recess installation in false ceilings or panels. It is ideal for the reproduction of announcements and background music and features a multiplesocket line transformer for use with constant voltage systems.
- Plastic body and white metal grid RAL 9003.
- Highly-efficient dual-cone extended range speaker, diameter 160 mm (6”).
- Easy to install thanks to a special tripleholdfast system, without the need for screws and other retention parts.
- Transformer for constant voltage 70V-100V lines with pre-selection on four power levels.
- Accessory A 1360 available for ceiling installation.

Link to manufacturer information

Related products:

The PL6X is a ceiling speakers featuring elegant and innovative design that can be flush-mounted in false ceilings or panels. Incorporating a 160 mm (6”) loudspeaker.

Both have a coaxial 25 mm (1”) tweeter placed on a bridge support. The speakers are equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V. The multiple sockets on the transformer make it possible to select the output power from among several values.

Installation is quick and easy thanks to a special three-hook system that avoids the need for using screws and pallet or other attachment elements.

Link to manufacturer information

The PL 70 BS is a ceiling speaker featuring a flameproof steel bottom designed for recess installation in false ceilings or panels. It is especially suitable for broadcasting alarm messages thanks to highly intelligible sound reproduction and is resistant to the high temperatures reached during fires.
The terminal connection boards are in ceramic material for input and output flameproof cables. A thermal fuse, protects the integrity of the line in case of heat affecting the speaker. Ground screw. Cables inside speaker made using flameproof leads.

Link to manufacturer information

Overhead speaker fo false ceiling installation. The PL 80/A is designed for distributed sound reproduction in large spaces with low to medium low ceilings. The A 1380 protection can be fitted when required by safety regulations.


- Body in RAL 9003 white plastic.
- Multi-tapped line transformer included for constant voltage systems.
- Twin-cone, wide band, low distortion Ø 200 mm loudspeaker.
- Quick fitting of the holder ring and easy bayonet hooking system.
- Flame-retardant white plastic body meets UL-94-5VA standards.

Link to manufacturer information

Related products:

Overhead speaker for false ceiling installation. The PL 81/A provides a wider amgle of coverage for large spaces with medium to high ceilings. The PL 81/A can support up to 40 W power and, if used without transformer, can generate a sound pressure of 113 dB. The A 1380 protection can be fitted when required by safety regulations.

- Body in RAL 9003 white plastic.
- Multi-tapped line transformer included for constant voltage systems.
- Twin-cone, wide band, low distortion Ø 200 mm loudspeaker.
- Coaxial loudspeaker.
- Quick fitting of the holder ring and easy bayonet hooking system.
- Flame-retardant white plastic body meets UL-94-5VA standards.

Link to manufacturer information

Related products:

The PL8X is a ceiling speakers featuring elegant and innovative design that can be flush-mounted in false ceilings or panels. Incorporating a 200 mm (8”) loudspeaker.

Both have a coaxial 25 mm (1”) tweeter placed on a bridge support. The speakers are equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V. The multiple sockets on the transformer make it possible to select the output power from among several values.

Installation is quick and easy thanks to a special three-hook system that avoids the need for using screws and pallet or other attachment elements.

Link to manufacturer information

Waterproof speaker for flush-mounting

A speaker designed to be flush-mounted in panels or false ceilings. Its particular construction characteristics make it suitable also for outdoor use and on boats.
The WS 620XT employs a 160 mm (6”) loudspeaker with 25 mm (1”) coaxial tweeter. It has a built-in line transformer that enables direct connection to constant voltage systems at 70 V or 100 V. It is also possible to use the low impedance (4 ohm) socket; in this case, the transformer can be removed, considerably reducing the depth of the speaker.

Link to manufacturer information