BS-634 and BS-634T

The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosure’s design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.

Link to manufacturer information

BS-634 and BS-634T

The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosure’s design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.

Link to manufacturer information

The speaker's smoothly curved surface permits it to blend in with virtually all modern buildings.
A built-in matching transformer permits the speaker to be used for both high-impedance and low-impedance (8ohm) applications. The impedance can be easily changed from outside the speaker.
A splash-proof design enables the BS-1030 to even be installed outdoors, in a location not directly exposed to the elements, such as under eaves.
Mountable to wall surfaces directly or using with supplied or optional mounting brackets.

Link to manufacturer information

Related products:

Innovative design based on the golden ratio (1: 1.618)
Unparalleled ease and simplicity of installation
Brand-new slim body

Rated Input : 10W(100V line)
Impedance : 100V line...1k ohm(10W), 2k ohms(5W), 3.3k ohms(3W), 10k ohms(1W)
Frequency Response : 120 - 20,000 Hz
Sound Pressure Level : 90 dB
Dimensions : 210(W) x 330(H) x 80(D)mm
Input Terminal : M4 screw terminal
Speaker Component : 5" (12cm) cone-type + balanced dome tweeter
Finish Enclosure : HIPS resin, off-white
Grille : Steel plate net, off-white, paint

Link to manufacturer information

Thin type wall mount speaker with 5" cone speaker unit
Two-way speaker system employing a balanced dome tweeter and elliptical horn for high-frequency sound reproduction in combination with a 5" cone speaker unit ensures high-quality sound. The speaker's smoothly curved surface in combination with its straight lines permits it to blend in with virtually all modern buildings.
Equipped with a speaker receptacle, providing speaker cable connection and installation ease.
Equipped with a lock mechanism, preventing the speaker from being detached easily after installation.
In-wall wiring, exposed wiring, or bridge wiring available for speaker cable connection
The input power (impedance) can be easily changed by the rear-mounted rotary switch.

Link to manufacturer information

F-1000 full range wide dispersion speaker

The latest addition to TOA's acclaimed speaker line, the new F-1000 Series of compact,
high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-1000 Series are ideal solutions that solve increasing needs for adaptable sound reinforcement.

Link to manufacturer information

Related products:

The rotatable cylinder enclosure with smooth curved surface blends in with modern building interior.
Powerful sound reproduction with the woofer (8 x 5cm) using a magnetic (neodymium) circuit.
Transient response of clear high frequencies ensured by the
1" balanced dome tweeter with ferro-fluid.
Built-in crossover network circuitry suppresses unwanted signals and
realizes uniform energy radiation.
Optimized for quick and simple installation.
Adjustable mounting angle of ±45°.
Built-in transformer for both high and low impedance applications.
Detachable screw terminals for quick connection/disconnection and Dual positive/ negative terminals for bridge connections.
Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure
Specially selected external parts for easy refinishing and repainting, matching interior color and design.

Link to manufacturer information

Powerful sound reproduction with the woofer (10cm) using a magnetic (neodymium) circuit.
Transient response of clear high frequenciesensured by the 1" balanced dome tweeter with ferro-fluid.
Built-in crossover network circuitry suppresses unwanted signals and realizes uniform energy radiation.
Optimized for quick and simple installation.
The speaker's round mounting base allows installation at any mounting angle.
Built-in transformer for both high and low impedance applications.
Detachable screw terminals for quick connection/disconnection and Dual positive/negative terminals for bridge connections.
Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure
Specially selected external parts for easy refinishing and repainting, matching interior color and design.

Link to manufacturer information.

Attractive and compact design permits bracketless direct wall standard gang-box
installation at above head-height.
Controlled 180° coverage pattern eliminates between-speaker audio dead spaces.
Powerful TOA-designed neodymium magnet cone driver, plus tweeter.
Built-in steep-slope crossover circuitry ensures smooth dispersion pattern and audio response.
Transformer included to allow both high- and low-impedance operation.
Paintable grilles enhance interior decor.
Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure

Link to manufacturer information

The MQ30P is an orientable two-way mini-speaker. The components are a 3” woofer and a coaxial dome tweeter that ensure a wide angle of coverage. Combined with a subwoofer, the MQ30P allows high quality music distribution with high output levels. An important feature of the MQ30P is that it
provides consistent reproduction of all the frequencies involved in voice transmission and therefore, alone or in
combination with a subwoofer, makes it possible to obtain a high level of vocal intelligibility. The MQ30P has been designed to adhere closely to the wall or ceiling and thus ithas a limited protrusion. The built-in hinged support makes the speaker easy to install and orient in any direction.Like the other Monitor Q products, MQ30P installation is simple and flexible.

Link to manufacturer information

Related products:

MQ50

The MQ50 is a monitor speaker for constant directivity installation. It is a two-way
speaker with 5” woofer and waveguideloaded dome tweeter to ensure intelligibility
and correct dispersion of the sound over a wide angle of coverage.
The built-in support makes the MQ50 easy to install and enables close fi tting to the
wall, limiting its protrusion. The exclusive attachment system designed
for the MQ50 model allows the installer to fi t the attachment bracket to the wall and
make the electrical connections during the preinstallation phase; subsequently, when
all the works are completed, the MQ50 is positioned, oriented, and connected with a
simple “click”, without the need for tools.

Link to manufacturer information

Related products:

MQ50C

Compact design, light weight and limited depth make the RCF MQ50C 2-way
ceiling monitor loudspeakers ideal for use in any PA systems and background/
foreground music systems where high quality sound reproduction is required.
The woofer is a high-excursion, PP coated paper cone – rubber surround design
mounted in a tuned enclosure. The fabric dome tweeter is loaded on a constant Q
wave guide to provide natural, smooth sound reproduction on a wide dispersion
angle. Installation of the MQ50C is fast and effi cient using the built in rotating
hooks. No additional brackets or rings or other supports are required: thanks to
its lightweight construction the speaker can be mounted as a conventional ceiling
speaker. Connections are made to four polar loop thru Euroblock male and female
connectors to easily offer parallel in/out wiring facilities. Wattage taps and voltage
adjustments together with 16-ohm operation are selectable by means
of a Rotary switch, accessible under the frontal grill. A front protection system is
provided for over-painting the bezel and grille.

Link to manufacturer information

Related products:

MQ60H

The MQ60H is a wall mount monitor speaker designed to guarantee uniform
coverage of a large area in order to limit the number of speakers and therefore the
installation points.
It is a two-way speaker with three transducers: the 5“ woofer and the two
horn-loaded dome tweeters with constant directivity are positioned in such a way as
to ensure the maximum listening comfort within the area covered.

Installation is carried out in two phases; fi rst, you mount the support on the wall
and make the electrical connections; when all the works are completed, you insert the
speaker and make a quick connection.

Link to manufacturer information

Related products:

MQ80P

High intelligibility, high effi ciency and compact design make the RCF MQ 80P 2-
way horn-loaded sound projector speaker system the ideal solution to get clear
voice and music reproduction in mid-size environment.
Suitable for PA systems and background/ foreground music systems. Thanks to its
90° X 60°constant directivity and to simple accessories it can be combined in clusters
of 2 or more pieces to get wide and smooth coverage and to reduce the installation
points. It is suitable for both indoor and outdoor installations (IP 65). Installation of the MQ
80P is quick thanks to the unique bracket with several fi xing points and aiming
facilities.

Connections are made by a multi-pole cable.
Wattage taps and voltage adjustments together with 8-ohm operation are
selectable by means of a Rotary switch, accessible under a sealed cover.

Link to manufacturer information

Related products:

Compact design and a wealth of mount-ing options make the RCF Monitor 33T (black) and Monitor 33/WT (white) com-pact 2-way loudspeakers ideal for use in business music systems.
The woofer is a high-excursion, carbon fiber design. The mylar dome tweeter is mounted on a contant directivity horn to provide natural, smooth sound reproduction and high resistance to weather. Installation of the Monitor 33T is fast and efficient using the accompanying adjustable mounting bracket.
- 4.75" high-efficiency carbon fiber woofer.
- 0.5" mylar dome tweeter loaded by a 110º x 100º constant directivity horn.
- Built-in, multi-tap constant voltage transformer.
- Built-in, low-inductance passive crossover.
- Lightweight, UV/weather resistant, high density polystyrene, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion.
- Integrated mounting points for use with optional mounting hardware.
- Articulated surface mount hardware included.

Link to manufacturer information

Careful acoustic design and the use of advanced materials contribute to the exceptional
music fidelity and speech intelligibility exhibited by the RCF Monitor 44T (black)
and Monitor 44/WT (white) two-way speaker systems.

Applications
• Foreground/Background Music
• Distributed Speech Reinforcement
• AV Production/Playback
• Near-field Monitoring

Features
• 5” high-effi ciency carbon fi ber woofer CD horn loaded, 0.5” dome tweeter
• Built-in, multi-tap constant voltage transformer
• Built-in, low-inductance passive crossover with high-frequency dynamic protection
• Lightweight, UV/weather resistant, trapezoidal shaped enclosure
for multiple applications and minimum visual intrusion
• Integrated mounting points for use with optional mounting hardware
• Articulated surface mount hardware included.

Link to manufacturer information

Related products: